Used Software:

DATAQ Instruments, Inc.

241 Springside Drive
Akron, OH 44333

WinDaq/HS High Speed Recording software Version 3.29
WinDaq/XL WinDaq add-on that allows acquired data
to be ported to a Microsoft Excel spreadsheet

WinDaq Settings:

Sample Rate: 960
Active Chanels: 1,2,3,4,5,6
Acquisition Method Chanel 1,2,5,6: RMS
Acquisition method Chanel 3,4: Average

Windaq-XL Settings:

Mode: Looping
Time Stamp: Yes
Starting Cell: A1
Rows to Fill: 60

Microsoft Excel Settings:

Chanel 1 Power Shaft 1

A1:Volt
A2-A61: Numeric Datas
=AVERAGE(A2:A61) at I3
=PRODUCT(I3,100) at I4
Factor 100 to measure W as:
Chanel 1 Power Shaft 1 Source Analog Output Chanel 1 ID#256191
Range Min -1000.0 W
Range Max 1000.0 W
Out Min -10.000 V
Out Max 10.000 V
ID#256191 (ComoTorque Type 4700) connected to ID#247687 (Torque Sensor)

Chanel 2 Power Shaft 2

B1:Volt
B2-B61: Numeric Datas
=AVERAGE(B2:B61) at K3
=PRODUCT(K3,100) at K4
Factor 100 to measure W as:
Chanel 2 Power Shaft 2 Source Analog Output Chanel 1 ID#251546
Range Min -1000.0 W
Range Max 1000.0 W
Out Min -10.000 V
Out Max 10.000 V
ID#251546 (Como Torque Type 4700) connected to ID#251545 (Torque Sensor)

Chanel 3 Speed Shaft 1

C1:Volt
C2-C61: Numeric Datas
=AVERAGE(C2:C61) at I8
=PRODUCT(I8,100) at I9
Factor 100 to measure rpm as:
Chanel 3 Speed Shaft 1 Source Analog Output Chanel 1 ID#256191
Range Min -1000.0 W
Range Max 1000.0 W
Out Min -10.000 V
Out Max 10.000 V
ID#256191 (ComoTorque Type 4700) connected to ID#247687 (Torque Sensor)

Chanel 4 Speed Shaft 2

D1:Volt
D2-D61: Numeric Datas
=AVERAGE(D2:D61) at K8
=PRODUCT(K8,100) at K9
Factor 100 to measure rpm as:
Chanel 4 Speed Shaft 2 Source Analog Output Chanel 1 ID#251546
Range Min -1000.0 W
Range Max 1000.0 W
Out Min -10.000 V
Out Max 10.000 V
ID#251546 (ComoTorque Type 4700) connected to ID#251545 (Torque Sensor)

Chanel 5 Torque Shaft 1

E1:Volt
E2-E61: Numeric Datas
=AVERAGE(E2:E61) at I13
=PRODUCT(I13,20) at I14
Factor 20 to measure Nm as:
Chanel 5 Torque Shaft 1 Source Analog Output Chanel 1 ID#256191
Range Min -100.0 W
Range Max 100.0 W
Out Min -5.000 V
Out Max 5.000 V
ID#256191 (ComoTorque Type 4700) connected to ID#247687 (Torque Sensor)

Chanel 6 Torque Shaft 2

F1:Volt
F2-F61: Numeric Datas
=AVERAGE(F2:F61) at K13
=PRODUCT(K14,20) at K14
Factor 20 to measure Nm as:
Chanel 6 Torque Shaft 2 Source Analog Output Chanel 1 ID#251546
Range Min -100.0 W
Range Max 100.0 W
Out Min -5.000 V
Out Max 5.000 V
ID#251546 (ComoTorque Type 4700) connected to ID#251545 (Torque Sensor)